Z Shape Cold Formed Steel Sheet Piling

Z Shape Cold Formed Steel Sheet Piling:

Introduction:

Steel sheet pile is a service-proven type familiar to both designers and constructors, which is extensively used for permanent structures, temporary earth-retaining works and temporary cofferdams, etc.
In addition to its rigid structure, its moment of inertia per pile is relatively large, thus allowing repetitive use.
website in a range of sections, with section modulus values ranging from 456 to 4042 cm3/m.

Z Sheet Pile

All of our sheet piles according ASTM A 328, ASTM A 690 standards

with continuous form of the web and the location of the interlock symmetrically on each side of the eneutral axis. It has great improvement on the section modulus. Following are the main advantages:

1. Large width, good installation performance

2. Extremely competative of section-modulus to mass ratio

3. Increased inertia for reduced deflection

4. Good corrosion resistance

steel sheet pile drawing

Specification:

Section Type	Width	Height	Thickness	Section	Weight	Weight	Moment of	Modulus of
Section Type	w	h	t	Area	Perpile	perwall	Inertia	Section
	mm	mm	mm	cm2/m	kg/m	kg/m2	cm4/m	cm3/m
SLZ17-3	575	370	8.5	142.8	64.5	112	28890	1655
SLZ17-4	575	370	9	148.2	66.9	116	30110	1725
SLZ17-5	575	350	9.5	149	67.3	117	29760	1705

Optional Steel Grades:

Model	Mechanical Feature
Model	Yield(Mpa)	Tensile(Mpa)	Elongation(%)	Impact Energy
Q235B	235	375-460	38	27
Q345B	≥345	470-630	≥21	≥34
Q345C	≥345	470-630	≥21	≥34
MDB350	≥350	470-630	≥21	≥60
MDB380	≥380	480-640	≥21	≥60
Foreign Model
S355J0	≥355	470-630	≥22	≥27
St52-3	≥355	490-630	≥22	≥27
SM490A	≥325	490-610	≥20
SM490B	≥325	490-610	≥20	≥27
SS490	≥285	490-610	≥19

Application:

Cofferdam(land); Cofferdam(Water); Low embankment; Deep foundation pit; Shallow underground excavation; Light-duty Sea Use; Heavy-duty Sea Use; Underground water quality control. etc.

Project Cases: