450*360 U Shape Cold Bending Steel Sheet Piling

Steel Sheet Pile:

Introduction:

Steel sheet pile is a service-proven type familiar to both designers and constructors, which is extensively used for permanent structures, temporary earth-retaining works and temporary cofferdams, etc.
In addition to its rigid structure, its moment of inertia per pile is relatively large, thus allowing repetitive use.
Available in a range of sections, with section modulus values ranging from 456 to 4042 cm3/m.

U Sheet Pile have many advantages as following:

1.It combines grest profile depth and has excellent statical properties.2.It is quite suitable for re-use due to the symmetrical form of the single element.
3.It is possible to assemble the piles into pairs in the factory, this way couldimprove the quality and performance of installation.
4.Good corrosion resistanca performance.

steel sheet pile

Specification:

steel sheet piles

Type

Width

Height

Thickness

Weight

Per pile

Weight

Per wall

Moment

of inertia

Section

modulus

Kg/m

Kg/ m2

Cm4/m

Cm3/m

BMU10-450	450	360	8	52.5	116.7	18268	1015
BMU11-450	450	360	9	58.6	130.2	20375	1132
BMU12-450	450	360	10	64.7	143.8	22444	1247
BMU11-575	575	360	8	60.4	105.1	19685	1094
BMU12-575	575	360	9	67.5	117.4	21973	1221
BMU13-575	575	360	10	74.5	129.5	24224	1346
BMU11-600	600	360	8	61.9	103.2	19897	1105
BMU12-600	600	360	9	69.5	115.8	22213	1234
BMU13-600	600	360	10	76.5	127.5	24491	1361

Application:

Cofferdam(land); Cofferdam(Water); Low embankment; Deep foundation pit; Shallow underground excavation; Light-duty Sea Use; Heavy-duty Sea Use; Underground water quality control. etc.

Project Cases:

steel sheet pile