RFOU(i) S1/S5 mud resistant offshore communication cable

RFOU(i) S1/S5 mud resistant offshore communication cable application

The cables are flame retardant , halogen free and mud resistant, suitable for instrumentation, communication, control and alarm systems.

RFOU(i) S1/S5 mud resistant offshore communication cable Standards

IEC 60092-376
IEC 60092-351
IEC 60092-359
IEC 60332-1
IEC 60332-3-22
IEC 60754-1,2
IEC 61034-1,2
NEK 606:2004

RFOU(i) S1/S5 mud resistant offshore communication cableMain Parameter

Maximum conductor temperature:+90℃

Rated Voltage:250v

Tested Voltage:1.5kv/5min

Flame spread test on bunched cable:Category A

Smoke density of finished cable:≥60%

Bending radius : 8 × OD ( installing ); 6 × OD ( fixed installation )

RFOU(i) S1/S5 mud resistant offshore communication cable construction

1.Conductors: Circular tinned annealed stranded copper wire to IEC 60228 class 2.
2.Insulation: Halogen free EPR compound.
3.Twinning: Colour coded cores twisted together.
4.Individual Shielding: Each pairs/triples are screened by copper backed polyester
5.tape in contact with a stranded tinned copper drain wire and wrapped with polyester
6.tape. Pairs/triples are numbered with numbered tape or by numbers printed directly on the insulated conductors.
7.Bedding: Halogen free compound.
8.Armour: Tinned copper wire braid.
9.Outer Sheath: Halogen free thermosetting compound, SHF2 (for TYPE S1). Halogen free MUD resistant thermosetting compound, SHF MUD (for TYPE S1/S5), coloured grey (blue for intrinsically safe).

RFOU(i) S1/S5 mud resistant offshore communication cable electrical characteristics

Nominal Cross Section Area	mm2	0.75	1.0	1.5	2.5
Nominal Conductor Diameter	mm	1.1	1.3	1.6	2.0
Max.Resistance @20℃	Ω/km	26.3	19.3	12.9	8.02
Mutual Capacitance	nF/km	90	100	110	120
Nominal Inductance@1KHz	MH/km	0.686	0.649	0.637	0.598
Max. L/R@1KHz	μH/Ω	20	25	35	50
Working Voltage	V	250	250	250	250