Marine Biochemical Sewage Treatment Equipment

The plant is applicable to treat the sewage from the toilets on ships to satisfy international standards for effluent discharge.

The plant treats organic pollution substance by using the principles of biochemical method.

The treatment procedures of the plants are shown as following:

marine Sewage Treatment plant.jpg

The plant can be used for sterilizing gray water on ships as well.

SWCB type Biochemical Sewage Treatment Plant uses the activated sludge and theprinciple of biologic membranes to digest organic pollutant.

MARKS:

1). The plant can be used on inspected or non-inspected ships.

2). The plant can use either fresh water or seawater to flush sewage in toilets.
3). The test pressure of the tank is 0.021MPa.

4). The effluent index of the plant is in compliance with the standards of IMO.

Specification		SWCB-10
Treated Load	Average (L/D)	840
	Pinnacle(L/H)	105
	Organic Load (kgBOD5/d)	0.42
Rated Capacity (Person)		10
Max. Capacity (Person)		12
Power		AC 380V/50HZ/3Φ, AC440V/60HZ/3Φ
Chemical Consumption (kg/d)		0.034
Air Pump	Type	CYBW-6
	Capacity (m³/h)	6
	Pressure (Kpa)	60
	Speed (r/min)	1400/1720
	Motor Power (kw)	0.25
Cutting and Discharge Pump	Type	0.5CWF-8
	Capacity (m³/h)	5
	Pressure (Kpa)	0.08
	Speed (r/min)	2840/3470
	Motor Power (kw)	0.75
	Motor Type	YS-H8012
Size (mm) (LWH)		130011701380
Weight	Dry (kg)	1050
Weight	Wet (kg)	2100
Pollution Discharge		Biochemical Oxygen Demand(BOD5)≤50mg/L, Suspended Solid(SS)≤50mg/L, Colichin≤250pc/100ml, Phvalue6-9