Carbon steel welding rod
Carbon steel rods is suitable for the carbon steel and the low intensity of low alloy steel welding.
welding rods Selection according to the steel chemical composition, mechanical properties and crack performance requirements, but also consider the welding structure, steel plate thickness, working conditions, stress, welder performance factors comprehensive analysis. When necessary, do welding test, formulate the corresponding technical measures, and determines the selection of electrode.
In order to ensure the quality of welding process , workpiece joint should be clean, no oil, rust,Moisture, paint and dirt, etc., it is particularly important to use low hydrogen type electrode
Type |
GB model |
Coating type |
Current |
Usage |
J421 (J38.12) |
E4313 |
Titanium |
AC and DC |
For welding low-carbon steel structures, especially suitable for |
J421X |
E4313 |
Titanium |
AC and DC |
Suitable for welding general carbon steel and zinc-coated steel |
J421Fe |
E4313 |
Titanium |
AC and DC |
For welding general low-carbon steel structures, |
J421Fe16 |
E4324 |
Titanium |
AC and DC |
Used for downhand welding and flat fillet welding on general low-carbon steel structures. |
J421Fe18 |
E4324 |
Titanium |
AC and DC |
Used for downhand welding and flat fillet welding on general low |
J422(J40.50) |
E4303 |
Titanium calcium |
AC and DC |
Used for welding key low-carbon steel structures and low-alloy |
J422GM |
E4303 |
Titanium calcium |
AC and DC |
|
J422Fe |
E4303 |
Titanium calcium |
AC and DC |
Suitable for welding key low-carbon steel structures. |
J422Fe16 |
E4323 |
Titanium calcium |
AC and DC |
Used for welding key low-carbon steel structures. |
J423 |
E4301 |
ilmenite |
AC and DC |
Used for welding key low-carbon steel structures, |
J424 |
E4320 |
Iron oxide |
AC and DC |
Able to weld key low-carbon structures, such as heavy machinery, |
J426(J48.46) |
E4316 |
Low hydrogen |
AC and DC |
Used for welding key low-carbon steel and low-alloy steel |
J427 (J48.47) |
E4315 |
Low hydrogen |
DCEP |
Used for welding key steel structures under pressure and loads |
J427D |
E4315 |
Low hydrogen |
DCEP |
Specially used for backing weld on carbon steel and low-alloy steel |
J427Ni |
E4315 |
Low hydrogen |
DCEP |
Used for welding key low-carbon steel structures and key low |
J501Fe |
E5014 |
Titanium |
AC and DC |
Used for welding carbon steel and low-alloy structures, |
J501Fe15 (J38.62Fe15) |
E5024 |
Titanium |
AC and DC |
Used for welding carbon steel and low-alloy structures, such as A, B |
J501Fe18 |
E5024 |
Titanium |
AC and DC |
Used for welding carbon steel and low-alloy structures, such as A, B |
J502 |
E5003 |
Titanium calcium type |
AC and DC |
Mainly used for welding 490MPa tensile strength low-alloy steel |
J503 |
E5001 |
Ilmenite |
AC and DC |
Suitable for welding low-alloy steel, such as 16Mn, etc. |
J506(J48.56) |
E5016 |
Low hydrogen |
AC and DC |
Used for welding medium-carbon steel and low-alloy steel |
J506R |
E5016 |
Low hydrogen |
AC and DC |
Specially used for backing weld on groove bottom of carbon steel |
J506Fe |
E5018 |
Low hydrogen |
AC and DC |
Used for welding carbon steel and low-alloy steel structures, |
J506Fe-1 |
E5018-1 |
Low hydrogen |
AC and DC |
Suitable for welding carbon steel and low-alloy steel structures like offshore oil platforms, ocean going vessels, etc. |
J506Fe16 |
E5028 |
Low hydrogen |
AC and DC |
Used for downhand welding and flat fillet welding on carbon steel |
J506Fe18 |
E5028 |
Low hydrogen |
AC and DC |
Used for downhand welding and flat fillet welding on carbon steel. |
J506H |
E5016-1 |
Low hydrogen |
AC and DC |
Used for welding key carbon steel and low-alloy steel structures |
J506D |
E5016 |
Low hydrogen |
AC and DC |
Specially used for backing weld on groove bottom of carbon steel |
J507 (J48.57) |
E5015 |
Low hydrogen |
DCEP |
Used for welding key medium-carbon steel and low-alloy steel |
J507R |
E5015 |
Low hydrogen |
DCEP |
Used for welding carbon and low-alloy steel structures, such as |
J507Fe16 |
E5028 |
Low hydrogen |
DCEP |
U Used for downhand welding and flat fillet welding on carbon steel. |
J507H |
E5015 |
Low hydrogen |
DCEP |
Used for welding key carbon steel and low-alloy steel structures. |
J507X |
E5015 |
Low hydrogen |
DCEP |
Suitable for welding vertical downward fillet weld of carbon steel and low-alloy steel structures. |
CONTACT WITH US NOW