Metallic Screened Power Cable

Metallic Screened Power Cable

1.This product is suitable for power lines rated voltage 0.6/1kv and below transmission electricity. Products with strong anti-electromagnetic interference , anti-lightning and balanced potential, improve power quality characteristics , especially suitable for computer centers , aerospace monitoring center, intelligent building and other sophisticated electronic devices places.

2.Execution Standard:GB/T 12706.1 2002,IEC60502,and BS6346, VDE, AS/NZS, UL,etc or as customer's request.

3.We can produce flame retardant or fire resistant as customer required

4.Metallic Screen has two type,metallic wire and metallic tape as cunstomer required

5.Flexible core conductor available

If you feel this is not what you are looking for,please kindly check more power cable here,also you can check more cable here,or you can use the search form on the upper right corner.

Metallic Screened Power Cable Features

1.there is a strong anti-corrosion,acid,alkalne and organic solvents.

2.shielded power cable with anti- electromagnetic interference capability.

3.power soft cable with a fixed installation,mobile use,performance,flexibility and other characteristics.

4.laying, installation and maintenance simple and convenient.

5.shielded cable with the above properties, but also has a ground shield can replace the role of secondary earth core and reach secondary line conductor resistance requirements , both grounded , but also replace the secondary line.

Metallic Screened Power Cable Technical Parematers

1. finished cable shall withstand voltage 3500V/5min test .
2.the cable conductor is maximum working temperature does not exceed 7O ℃.
3.cable laying temperature not lower than 0 ℃.
4.the cable minimum bend radius should be: a structural steel armored cable , not less than I2 times the cable diameter , with wire shield flexible cable is not less than eight times the cable diameter .

If you feel this is not what you are looking for,please kindly check more power cable here,also you can check more cable here,or you can use the search form on the upper right corner.

XLPE INSULATED PVC POWER CABLE 1kV~35 KV

1 Information

a, Number of cores:

1, 2, 3, 3+1, 3+2, 3+3, 4, 4+1, 4+2, 5 and so on.

b, Construction:

Conductor: Solid or stranded copper
Insulation: Cross-linked polyethylene (XLPE) or Polyvinyl chloride (PVC)
Filler: Polypropylene filament with lapped binding tape
Binder: Binding tape
Inner sheath: Polyvinyl chloride (PVC)
Amour: Galvanized steel wire armored(SWA) or steel tape armored(STA)
Sheath: Polyvinyl chloride (PVC)

c, Nominal Section
Area(mm2) :1.5 2.5 4 6 10 16 25 35 50 70 95 120 150 185 240 300 400 500 630 800

d, Features

XLPE insulated power cable do not has excellent electric, mechanical properties,but also has powerful resistance against chemical corrosion,heat resistance and enviromental stress resistance. Its structure is simple. The long period operating temperature is +90 °C. It is conveninet to use and can be laid with no restriction of different level.

XLPE insulated steel wire armoured power cable: XLPE/PVC insulated power cable has a number of advantages over paper insulated and PVC insulated cable. XLPE cable has high electric strength, mechanical strength, high-ageing resisting, environmetal stress resisting antichemical corrossion, and it is simple construction, using convenient and higher operating of long term temperature. It can be laid with no drop restriction.

Various of flame-retardant and non-flame retardant XLPE cable can be manufactured with three technology(peroxide, silane and irradiation crosslinking). The flame-retardant cable covers all kinds of low-smoke low-halogen low-smoke halogen free, and non-smoke nonhalogented and three classes of A, B, C.

2 Standard:

IEC60502,and BS6346, VDE, AS/NZS, UL,etc or as customer's request.

3 The Rated Voltage(kv):

1st class 0.6/1 1.8/3 3.6/6 6/10 8.7/15 12/20 18/30 21/35
2nd class 1/1 3/3 6/6 8.7/10 12/15 18/20 - 26/35

4 Application:

1)These cables are most suitable for direct burial or for installation on trays or ducts, Where there is a risk of mechanical damage, armoured cables should be used.

2) For laying in ground along route with large difference of level able to bear external mechanical forces.

5 Model and Name

China Type		Description	Application
Cu	Al
YJV	YJLV	XLPE insulation PVC sheath power cable (Cu/XLPE/PVC)	To be laid indoors, in tunnel, cable furrow or pipe, the cable couldn't bear mechanical force outside
YJY	YJLY	XLPE insulation PE sheath power cable (Cu/XLPE/PE)
YJV22	YJLV22	XLPE insulation, steel tape armor, PVC sheath power cable (Cu/XLPE/PVC/STA/PVC)	To be laid underground, the cable could bear certain mechanical force, but it couldn't bear great pulling force.
YJV23	YJLV23	XLPE insulation, steel tape armor, PE sheath power cable (Cu/XLPE/PVC/STA/PE)
YJV62	YJLV62	XLPE insulation, no magnetism steel tape armor, PE sheath power cable
YJV32	YJLV32	XLPE insulation, thin steel-wire armor, PVC sheath power cable (Cu/XLPE/PVC/SWA/PVC)	For high drop zone , the cable can withstand external mechanical forces and considerable tension
YJV72	YJLV72	XLPE insulation, have no the magnetism thick steel-wire armor, PVC sheath power cable
YJV42	YJLV42	XLPE insulation, thick steel-wire armor, PVC sheath power cable	Be applicable to the well, underwater with the bottom of sea, the cable cans bear the bigger pressure with lead to pull the dint.