AWS ENiFe-C1 Z408 cast iron welding rod

AWS ENiFe-C1 Z408 cast iron welding rod

Z408
GB:EZNiFe-1
AWS:ENiFe-C1
Current:Suitable for repair welding on key high strength gray cast iron and spheroidal graphite cast iron, such as cylinders, engine bearers, gears, rollers, etc.
Main Applications:

Z408

According with GB EZNiFe-1
Corresponding with AWS ENiFe-C1


Introduction: Z408 is a kind of cast iron electrode with Ni-Fe alloy core wire and strong reducibility graphite type coating. It has some characteristics like high strength, good plasticity, low coefficient of linear expansion, etc. The crack-resistance for gray cast iron is similar with that of Z308, but the crack-resistance for spheroidal graphite cast iron is higher than that of Z308. It is also effective for cast iron with high phosphorus content (0.2%P). The machinability is a little worse than that of Z308 and Z508. Used for welding gray cast iron and spheroidal graphite cast iron under normal temperature or preheated a little (to about 200℃). AC/DC.


Uses: Suitable for repair welding on key high strength gray cast iron and spheroidal graphite cast iron, such as cylinders, engine bearers, gears, rollers, etc.


Chemical Composition of Deposited Metal (%)
Chemical Composition
C
Mn
Si
S
Ni
Fe
Total Quantity of Other Elements
Guarantee Value
≤2.00
≤1.80
≤2.50
≤0.030
45~60
Balance
≤1.00

Reference Current (AC, DC+)
Electrode Diameter(mm)
φ3.2
φ4.0
φ5.0
Welding Current (A)
50~100
70~120
110~180

Instructions:
The electrodes must be baked under about 150℃ for an hour before welding.

CONTACT WITH US NOW

Our mail: manager@hiseamarine.com

Society certificates

Hi-Sea Group-Obtained-certification