500*200mm Hot Rolled U Shaped Steel Sheet Piling

750*205.5mm Hot Rolled U Shaped Steel Sheet Piling:

Introduction:

Steel sheet pile is a service-proven type familiar to both designers and constructors, which is extensively used for permanent structures, temporary earth-retaining works and temporary cofferdams, etc.
In addition to its rigid structure, its moment of inertia per pile is relatively large, thus allowing repetitive use.
website in a range of sections, with section modulus values ranging from 456 to 4042 cm3/m.

Hot Rolling Steel sheet pile application advantage

Hot rolled U steel sheet pile is meet the basic structure and function, safe and reliable and efficient environmental protection characteristic.The main advantages are as follows.

1. strong bearing capacity, its light structure.Steel plate pile continuous wall with very high strength and rigidity

2. good water tightness.Steel sheet pile connection locking tightly combined natural seepage

3. simple construction.Can adapt to different geological conditions and soil can reduce the excavation of earthwork.Operation occupies smaller venues

4. good durability.As the use of environmental differences, life up to 50 years

5. construction of environmental protection.Soil and concrete substantially reduced amount, can effectively protect the land resources

6. high efficiency.Very suitable for fast implementation of flood protection, collapse, quicksand, earthquake disaster rescue and prevention.

7. the repeated use of recyclable materials.In temporary works can be used 20-30 times

8. compared with other monomers structure, wall is light and has greater adaptability to deformation, is suitable for various geological disaster prevention management.

steel sheet pile

Our company, a professional steel sheet pile maker, is able to conduct a range of laboratory tests for higher quality.

Standard 5523 / JISA 5528

Dimension:

Size

Width (mm)

Height (mm)

Thickness (mm)

Per Piece

Per Meter

Section area

(cm²)

Inertia moment Ix

(cm⁴)

Section modulus

(cm³)

Weight (kg/m)

Section area (cm²)

Inertia moment Ix

(cm⁴)

Inertia moment Ix

(cm³)

Weight (kg/m²)

SPU5L

500

200

24.3

133.8

105

7960

520

267.6

210

63000

3150

Optional Steel Grades:

Model	Mechanical Feature
Model	Yield(Mpa)	Tensile(Mpa)	Elongation(%)	Impact Energy
Q235B	235	375-460	38	27
Q345B	≥345	470-630	≥21	≥34
Q345C	≥345	470-630	≥21	≥34
MDB350	≥350	470-630	≥21	≥60
MDB380	≥380	480-640	≥21	≥60
Foreign Model
S355J0	≥355	470-630	≥22	≥27
St52-3	≥355	490-630	≥22	≥27
SM490A	≥325	490-610	≥20
SM490B	≥325	490-610	≥20	≥27
SS490	≥285	490-610	≥19

Application:

Cofferdam(land); Cofferdam(Water); Low embankment; Deep foundation pit; Shallow underground excavation; Light-duty Sea Use; Heavy-duty Sea Use; Underground water quality control. etc.

Project Cases:

steel sheet pile