4.00m3/h Oil Water Separator

1. Application:

Every ship, whether it is a container ship, an oil tanker or a freighter, produces bilgewater which poses an acute disposal problem. The IMO (International Maritime Organization) specifies that bilgewater may be discharged into the sea only if its residual oil content is below 15 ppm.

This Oil Water Separator can be used to treat bilgewater in order to make it reach the requirements of IMO.MEPC.107 (49) resolution, which is also called 15ppm bilge water separator.It contains type approved 15ppm bilge water separator, 15ppm bilge alarm andAutomatic shut down Device.

2. Principle:

The Oil Water Separator adopts the combination of 1ststage, cone plate gravity and coalesce separation; 2ndstage, fiber filter and 3rdstage, membrane permeation in order to make the treated bilge water to reach the requirements of discharge standard of the resolution of IMO MEPC.107 (49).

3. Main Parameter Data:

Model		YWC-4.00
Technical Specifications		4.0
Rated capacity(m3/h)		4.0
Oil content of the discharged water		≤15ppm
Power of the electric heater(kw)		12kw
Electrical System		380V/50Hz/φ, 415V/50Hz/3φ, 440V/60Hz/3φ, 480V/60HZ/3φ, etc.
Power of the electric motor		2.2kw
Suction head		≤6m-H2O
Pressure of the discharged water		5-10m-H2O
Outline Dimension(LWH)(mm)		228017001900
Base		10#
Weight (kg)	Dry Weight	2100
	Wet Weight	3900