2.00m3/h Oil Water Separating Device

1. The Oil Water Separating Device Introduction:

The Oil Water Separating Device can be used to treat oily bilge water in order to make it reach the requirements of IMO.MEPC.107 (49) resolution, which is also called 15ppm bilge separator.It contains type approved 15ppm bilge water separator,15ppm bilge alarm and Automatic shut down Device.

2. The 2.00m3/h Oil Water Separating Device General Drawing:

2.00.jpg

3. The 2.00m3/h Oil Water Separating Device Technical Details:

Model		YWC-2.00
Technical Specifications		2.0
Rated capacity(m3/h)		2.0
Oil content of the discharged water		≤15ppm
Power of the electric heater(kw)		6kw
Electrical System		380V/50Hz,/φ, 415V/50Hz/3φ, 440V/60Hz/3φ, 480V/60HZ/3φ
Power of the electric motor		1.1kw
Suction head		≤6m-H2O
Pressure of the discharged water		5-10m-H2O
Outline Dimension(LWH)(mm)		190011201700
Base		8#
Weight (kg)	Dry Weight	1260
	Wet Weight	2260

4. The Oil Water Separating Device Principle Shot:

The device adopts the combination of 1st stage, cone plate gravity and coalesce separation; 2ndstage, fiber filter and 3rdstage, membrane permeation in order to make the treated bilge water to reach the requirements of discharge standard of the resolution of IMO MEPC.107 (49).

oil water separator.jpg

As shown inthe enclosed drawing，bilge water comes into the 1st stage coalescer separator because of the suction of the Feeding pump, that is in a vacuum negative pressure, and it effectively prevents the problem that the bilge water is difficult to be separated because of the emulsion caused by feed pump under pressure. The liquid coming out of Feeding pump is adsorbed and filtered by the 2nd stage fiber filter, and then goes into the 3rd stage membrane to reach the discharge standard.

There is a 15ppm bilge alarm in the ship cabin to measure the oil content of effluent. If it finds that the oil content of effluent is in an excess of limit, the oil content meter can make order to switch turn it into the 3rd stage, membrane treatment process.

The oil content meter will give an alarm if finds the oil content of effluent is above limit, and the unqualified water pneumaticthree-wayvalveVS6is opened automatically, so that the unqualified water is return to bilge, not to the overboard.