JQ.YJ601Ni-1 Gas-shielded Flux-cored Welding Wire

JQ.YJ601Ni-1

GB：E551T1-Ni1
AWS：E81T1-Ni1
Current：Used for welding structures made of 590MPa low-alloy high strength steel. Widely used for welding some key structures like hoisting machinery, bridges, storage tanks, steel-frame structures, etc.
Main Applications：

JQ.YJ601Ni-1

According with GB/T 17493-1998 E551T1-Ni1
Corresponding with AWS A5.29 E81T1-Ni1
JIS Z3313 YFW-C602R

Introduction: It is a kind of gas-shielded flux-cored welding wire for 590MPa high strength steel. JQ.YJ601Ni-1 is a kind of titania type CO2 gas-shielded flux-cored welding wire. It has excellent welding performance, soft and stable arc, fewer spatters, good slag detachability and beautiful appearance of weld. All-position welding. It has high welding efficiency. The weld metal has been given toughening treatment by microelements, so it has excellent low temperature toughness above -30℃ and good crack-resistance.

Uses: Used for welding structures made of 590MPa low-alloy high strength steel. Widely used for welding some key structures like hoisting machinery, bridges, storage tanks, steel-frame structures, etc.

Chemical Composition of Deposited Metal (%)(CO₂Shielding Gas)

Chemical Composition	C	Mn	Si	S	P	Ni	Mo
Guarantee Value	≤0.12	≤1.50	≤0.80	≤0.030	≤0.030	0.80-1.10	≤0.35
General Result	0.07	1.32	0.38	0.017	0.009	0.90	0.16

Mechanical Properties of Deposited Metal

Test Item	R_m(MPa)	R_eL或R_p0.2(Mpa)	A(%)	KV₂(J)
Guarantee Value	≥550	≥470	≥19	≥27(-30℃)
General Result	640	560	25	130

Reference Current (DC+)

Wire Diameter(mm)		φ1.2	φ1.4	φ1.6
Current Range(A)	Downhand Welding	120～300	150～400	180～450
	Vertical Upward Welding and Overhead Position Welding	120～260	150～270	180～280
	Vertical Downward Welding and Overhead Position Welding	200～300	220～300	250～300
	Horizontal Welding	120～280	150～320	180～350

Instructions:
1.The oil stains and rust on the weldments should be cleared away.
2.When welding, the gas flow rate is generally 20～25L/min.
3.When welding with flux-cored welding wires, the extension elongation should be 15～25mm.
4.The humidity of the welding wire storerooms should be preserved below 60%.
5.It is not suitable for non-vacuum-packed welding wires to be stored for more than half a year, and it is not suitable for vacuum-packed welding wires to be stored for more than a year.