Resistance seam welding machine

Resistance seam welder:

1. working principle: during welding, weldment is pressed between the two welding wheels, rotation of the the welding wheel drive weldment and powered, the weldment gets localized heating, to form successively overlapping solder joints, so as to constitute a continuous weld to achieve a permanent connection.

2. widely used in: car motorcycle fuel tank, barrel: steel drums, and forming the sheet metal workpiece, such as wheels muffler radiator the seam welding.

Seam welder usually rack pressurized institutions welding wheels (electrode) welding power Speed transmission mechanism and controller, etc.

3. Features:

a. pressurizing mechanism: transmit pressure evenly;

b. Welding wheels: inside outside the water-cooled inside outside wheel,

c. Governor transmission mechanism: the VVVF gear reducer drive;
d. Both longitudinal weld and cross weld.
Reference parameters:

Model parameters	FN-50K	FN-75	FN-100K	FN-150K	FN200K
rate capcity KVA	50	75	100	150	200
duty cycle %	50	50	50	50	50
power	380V/50HZ	380V/50HZ	380V/50HZ	380V/50HZ	380V/50HZ
secondary voltage V	5.2	7	8.6	11.8	14
max short circuit current KA	17	22	30	35	40
electrode warm extension /mm	520	520	520	600	600
Electrode working stroke/ mm	80	80	80	80	80
Rated electrode pressure /N	4700	7300	7300	12000	12000
bleed pressure /MPa	0.6	0.6	0. 0.6	0.6	0.6
cooling water flow L/min	15	25	25	30	30
cooling water pressure /MPa	0．15-0．3	0．15-0．3	0．15-0．3	0．15-0．3	0．15-0．3
welding ability /mm mild steel	0.8+0.8	1.0+1.0	1.2+1.2	1.8+1.8	2.0+2.0

CONTACT WITH US NOW

Society certificates

Resistance seam welding machine

Related products for "Resistance seam welding machine"

CONTACT WITH US NOW

Society certificates