Epoxy Antiabrasive Innoxious Hold Paint

Epoxy Antiabrasive Innoxious Hold Paint( use for boats, bottom and surface can use the same one)

Characteristics:long coating interval and excellent abrasion resistance, innoxious、resistance of water and brine, film tenacious and firm、good compatibility with several paints.
Uses:mainly use for steel which after handle it by abrasive blasting and hold anticorrosion of bulk cargo carrier.

Technical target：
Mixing ratio: Host crystal/Firming agent=8/1(by weight)
Standard film thickness: Dry: 100μm/coat
Academic spreading rate: 0.22kg/ m2/100μm
Solid contents: 77%
Humidity requirement: below 85%

Drying time & Coating interval

Substrate treatment：Remove rust、oxide skin by abrasive blasting, reached ISO Sa2.5 grade or remove rust by hand electrically, reached St3 grade
Matching：
Applicable under coatings: Unpainted steel