Elevator Electric Cable

Elevator Electric Cable application

1.The product applies to the signal and control circuits for supporting the lift lines use.
2.Rated voltage Uo/U for 300/500V,long cables should not be allowed to work more than 65℃.
3.Cable installation prior to use free hanging,full back twist,cable strengthening should be fixed and under tension at the same time.

If you feel this is not what you are looking for,please kindly check more special cable here,also you can check more cable here,or you can use the search form on the upper right corner.

Elevator Electric Cable Model and Specification

Model	Name	Usage scope	Specification
245IEC74(YT)	High-strength rubber sheath elevator cable	Used indoors	6-30 Cores 0.75-1mm2
245IEC75(YTF)	Neoprene or other substantial cooperation elevator cables into plastic elastomer sheath	Used indoors, outdoor oil contacts burning or extension of the non-pollution requirements of occasions	6-30 Cores 0.75-1mm2

Model	Structure mm	insulation thickness mm	sheath thickness mm	Cable Outer Diameter mm	Reference Weight KG/KM		Conductor resistance 20℃ ≤Ω*km
Model	Structure mm	insulation thickness mm	sheath thickness mm	Cable Outer Diameter mm	YT	YTF	Non Tinned Conductor	Tinned Conductor
6X0.75	24/0.20	0.8	1.5	14.8	205	211	27.3	28.0
9X0.75			2.0	18.3	324	335
12X0.75				22.9	415	427
18X0.75				24.0	508	521
24X0.75			2.5	27.5	700	718
30X0.75			2.5	30.9	860	882

6X1.0	32/0.20	0.8	1.5	15.3	230	237	20.5	21.0
9X1.0			2.0	18.9	365	376
12X1.0				23.7	468	481
18X1.0				24.8	579	593
24X1.0			2.5	28.4	794	814
30X1.0			2.5	32.0	976	999
Note: The above specifications for commonly used type,we also can produce according to user required special specifications.