DIN carbon steel hubbed slip-on flanges
DIN carbon steel hubbed slip-on flanges
DIN carbon steel hubbed slip-on flanges introduction
DIN carbon steel hubbed slip-on flanges are positioned so the inserted end of the pipe or fitting is set short of the flange face. This allows for a fillet weld inside the slip-on flange equal to the thickness of the pipe without doing any damage to the flange face.
DIN carbon steel hubbed slip-on flanges specification
Type | Carbon steel flange: hubbed slip-on flange |
Standard | DIN 86029(PN10); DIN 86030(PN16) |
Nominal diameter | DN10-1000 |
Steel processing | Smelted |
Certificate | ABS, CCS, DNV, GL, BV, LR, KR, etc. |
Application | Petroleum, chemical, food industry, marine, automobile industry, rail building, general engineering, etc. |
DIN carbon steel hubbed slip-on flanges construction (refer to the catalogue for dimensions)
![DIN-carbon-steel-hubbed-slip-on-flanges-construction.jpg](/upload/14-01-09/DIN-carbon-steel-hubbed-slip-on-flanges-construction.jpg)
DIN carbon steel hubbed slip-on flanges show
![DIN-carbon-steel-hubbed-slip-on-flanges-show.jpg](/upload/14-01-09/DIN-carbon-steel-hubbed-slip-on-flanges-show.jpg)
DIN carbon steel hubbed slip-on flanges processing
![DIN-carbon-steel-hubbed-slip-on-flanges-processing.jpg](/upload/14-01-09/DIN-carbon-steel-hubbed-slip-on-flanges-processing.jpg)
DIN carbon steel hubbed slip-on flanges workshop
![DIN-carbon-steel-hubbed-slip-on-flanges-workshop.jpg](/upload/14-01-09/DIN-carbon-steel-hubbed-slip-on-flanges-workshop.jpg)
DIN carbon steel hubbed slip-on flanges cooperation
Feel free to contact us for DIN carbon steel hubbed slip-on flanges, enquiries or drawings for special designs. All informations will attract our high attention.
Society certificates
![Hi-Sea Group-Obtained-certification](/themes/skin2013/Image/Hi-Sea-Group-Obtained-certification.jpg)
CONTACT WITH US NOW