Hot Rolled U Shaped Steel Sheet Pile

Hot Rolled U Shaped Steel Sheet:

Introduction:

Steel sheet pile is a service-proven type familiar to both designers and constructors, which is extensively used for permanent structures, temporary earth-retaining works and temporary cofferdams, etc.
In addition to its rigid structure, its moment of inertia per pile is relatively large, thus allowing repetitive use.
website in a range of sections, with section modulus values ranging from 456 to 4042 cm3/m.

Hot Rolling Steel sheet pile application advantage

Hot rolled U steel sheet pile is meet the basic structure and function, safe and reliable and efficient environmental protection characteristic.The main advantages are as follows.

1. strong bearing capacity, its light structure.Steel plate pile continuous wall with very high strength and rigidity

2. good water tightness.Steel sheet pile connection locking tightly combined natural seepage

3. simple construction.Can adapt to different geological conditions and soil can reduce the excavation of earthwork.Operation occupies smaller venues

4. good durability.As the use of environmental differences, life up to 50 years

5. construction of environmental protection.Soil and concrete substantially reduced amount, can effectively protect the land resources

6. high efficiency.Very suitable for fast implementation of flood protection, collapse, quicksand, earthquake disaster rescue and prevention.

7. the repeated use of recyclable materials.In temporary works can be used 20-30 times

8. compared with other monomers structure, wall is light and has greater adaptability to deformation, is suitable for various geological disaster prevention management.

Specification:

Type (W*H)	Width (mm)	High (mm)	Thickness t(mm)	Thickness s(mm)	Plastic Section Modulus(cm³/m )	Unit Weight(kg/m)	Moment of inertia(cm⁴ )	Elastic Section Modulus (cm³/m )
HSU18	600	430	10.2	8.4	1988	72.6	35950	1670
HS22	600	450	11.1	9.0	2422	81.9	46380	2060
HS32	600	452	19.5	11.0	3687	114.1	72320	3200
HS16	750	411	11.5	9.3	1891	86.3	32850	1600
HS20	750	444	12.0	10.0	2339	96.9	44440	2000
HS25	750	450	14.5	10.2	2866	110.4	56240	2500

Optional Steel Grades:

Model	Mechanical Feature
Model	Yield(Mpa)	Tensile(Mpa)	Elongation(%)	Impact Energy
Q235B	235	375-460	38	27
Q345B	≥345	470-630	≥21	≥34
Q345C	≥345	470-630	≥21	≥34
MDB350	≥350	470-630	≥21	≥60
MDB380	≥380	480-640	≥21	≥60
Foreign Model
S355J0	≥355	470-630	≥22	≥27
St52-3	≥355	490-630	≥22	≥27
SM490A	≥325	490-610	≥20
SM490B	≥325	490-610	≥20	≥27
SS490	≥285	490-610	≥19

Application:

Cofferdam(land); Cofferdam(Water); Low embankment; Deep foundation pit; Shallow underground excavation; Light-duty Sea Use; Heavy-duty Sea Use; Underground water quality control. etc.

Project Cases:

steel sheet pile