Dredge Turning Gland
The Dredge turning gland is designed by modular principle for heavy duty operation in any type of soil anywhere in the world. The Dredge turning gland enables the draghead to better follow the sea bottom or ocean floor. The Dredge turning gland allows a radial rotation in both directions of 15°. The Dredge turning gland consists of an inner and an outer pipe and has mechanical stops to limit rotation. Two bearings and a sealing make for a trouble-free use.
1. The dredge turning glands has adjustable turning angle
2. All flanges are cast together with the body of the pipes
3. All major components of dredge turning gland are cast designs
4. A rubber lip seal is used for the sealing of the dredge turning glands
5. Accurate machining and smooth machining surface of all parts is achieved to ensure sliding properties
6. The dredge turning gland has a compact seal design making the design less heavier
7. Dredge turning glands sliding rings are made from iron for better sliding factor
8. Adjustable turning range by using dismountable stoppers
9. Heavy duty design using minimal pipe wall thickness of 30 mm
size of dredge turning gland
Technical specifications
|
Pipe Inside Diameter (mm) |
Outside Diameter (OD) |
Pitch Cirle Diameter (P.C.D) |
Diameter of Bolt Hole |
Bolt Quantity |
Bolt Size |
Flange Thickness |
Over all Length |
Total Weight (kg) |
|
500 |
670 |
620 |
26 |
20 |
M24 |
38 |
1,500 |
1,320 |
|
600 |
780 |
725 |
30 |
20 |
M27 |
42 |
1,650 |
1,770 |
|
700 |
895 |
840 |
30 |
24 |
M27 |
50 |
1,800 |
2,382 |
|
800 |
1,015 |
950 |
33 |
24 |
M30 |
56 |
1,850 |
3,059 |
|
900 |
1,115 |
1,050 |
33 |
28 |
M30 |
62 |
1,900 |
3,652 |
|
1,000 |
1,230 |
1,160 |
36 |
28 |
M33 |
70 |
1,950 |
4,393 |
|
1,100 |
1,275 |
1,220 |
36 |
28 |
M33 |
76 |
2,000 |
5,047 |
|
1,200 |
1,455 |
1,380 |
39 |
32 |
M36 |
83 |
2,050 |
5,610 |
|
1,300 |
1,560 |
1,480 |
39 |
32 |
M36 |
83 |
2,100 |
6,753 |
|
1,400 |
1,675 |
1,590 |
42 |
36 |
M39 |
83 |
2,150 |
7,471 |
Note: According to user’s or design and manufacturing drawing.
Dredge turning gland in the factory
Dredge Turning Gland Quality Control:
Dredge turning glands are designed, produced and tested under strict ISO and ASTM standards and doubled tested at third party for verification.
Dredge Turning Gland Ready to shipping
maintenance and installation
Related products for "Dredge Turning Gland"
Society certificates
CONTACT WITH US NOW